Arizona CDL Knowledge Test Class A: Practice Test - Practice Test 01
List of questions
Related questions
How can you check for a leak in hydraulic brakes?
Pump the brake pedal three times, then hold down the pedal for five seconds. If the pedal moves, there may be a problem.
Push the brake pedal down as far as possible and release. If the brake pedal returns to its normal position, there may be a problem.
Push the brake pedal down as far as possible and release. If the brake squeaks, there may be a problem.
Anti-Lock Braking Systems (ABS):
Are not used on trucks.
Are only used on tucks carrying hazardous materials.
Allow drivers to stay in control when braking.
The parking brake in a newer vehicle is applied by:
Moving a lever to the right.
Pushing a yellow, diamond-shaped knob.
Pulling a yellow, diamond-shaped knob.
When starting your vehicle, the coolant temperature should:
Not change.
Increase gradually.
Quickly jump from low to high.
To make a stop in a vehicle equipped with air brakes, the driver should:
Press the brake pedal down.
Lift the brake pedal up.
Pull out the air brake knob.
A driver may have:
Two licenses: one for automobiles and one for trucks.
Only one license.
A license for every state in which they drive.
If approaching a vehicle with a distracted driver, you should:
Quickly pass the vehicle.
Maintain a safe distance from the vehicle.
Closely follow the vehicle.
Always perform the steps of a pre-trip inspection in the same order each time because:
You will be less likely to forget something.
You will have more time to complete the inspection.
It is required by law.
When completing an offset back/left parking maneuver, a driver should:
Pull straight forward, then back to the left.
Drive straight back, then pull forward to the left.
Pull straight forward, then drive straight back.
Pre-trip inspections:
Should never be done the same way two times in a row.
Should always be done in the same order.
Do not need to be done if the driver thinks the vehicle is in good operating order.
Question